Innovative Prototype development for Concrete Sales Management of Saha Nakhonpathom Concrete Co., Ltd

Authors

  • Chanitpak Kullayapichet College of Innovation Management, Suan Sunandha Rajabhat University
  • Wilailuk Rakbumrung College of Innovation Management, Suan Sunandha Rajabhat University

Keywords:

Technology acceptance, Prototype, Innovation, Management, Concrete sales

Abstract

The objectives of this research study were to (1) contrast individual degrees of acceptance of the innovative prototype for sales management of concrete, sorted by the demographic characteristics and (2) investigate the technological factors that influence the acceptance of the innovative prototype for the sales management of concrete. The research is conducted in a quantitative design. The samples of the study were selected by the systematic sampling, comprised of 400 customers of the company. Questionnaires were employed. The collected data were analyzed by means of (1) descriptive statistics: frequency, percentage, average, and standard deviation and (2) inferential statistics: ANOVA and multiple regression analysis. The Research Findings were as follows: (1) Concerned with the demographic characteristics of the participants (gender, age, education, and current profession), it has been disclosed that the participating customers with different professions were reported showing differences in accepting the innovative prototype for the sales management of concrete, which is at a level of .05. For the other factors, the difference was not found, and (2) Regarding the technological acceptance, it has been revealed that the perceived ease of use, perceived usefulness, attitude toward using as well as behavioral intention to use could have decent influence on the individuals. Such factors could present approximately 65% of acceptance tendency. Then, after the test of independent and dependent variables, it has been found that merely two factors (perceived usefulness and behavioral intention to use) could influence the individuals to accept the innovative prototype for the sales management of concrete, significantly at a statistical level of .05.

References

Ajzen, I. (1985). From intentions to actions: A theory of planned behavior. In J. Kuhl and J. Beckman (Eds.), Action-control: From cognition to behavior (pp. 11–39). Heidelberg: Springer.

Apinun, K. (2013). Factors influencing the selection of ready-mixed concrete of Wan Phatcement in Singburi. Thesis of the Degree of Master of Business Administration. Bangkok: Bangkok University. [Online]. Retrieved June, 2020 from: http://dspace.bu.ac.th/jspui/handle/123456789/1509 (in Thai)

Bandura, A (1986). Social foundations of thought and action: A social cognitive theory. Englewood Cliffs, NJ: Prentice-Hall.

Bank of Ayudhya Public Company Limited. (2019). Construction material business. [Online]. Retrieved March, 30, 2020 from: https://www.krungsri.com. (in Thai)

Chairat, P. (2004). Innovation management for executives. Bangkok: National Innovation Agency.

Cox, W.M. and Klinger, E. (1990) Incentive motivation, affective change, and alcohol use: A model. In: Cox, W.M., editor. (1990). Why People Drink. New York: Gardner Press, pp. 291–311.

Davis, F. D., Bagozzi, R. P., and Warshaw, P. R. (1989). User acceptance of computer technology: A comparison of two theoretical models. Management Sci, 35 (8), 982–1003.

Foster, G. M. (1973). Tradition Societies and Technological Change. New York: Harper and Row Publishers.

Hart, A. O., Nwibere, B. M., and Inyang, B. J. (2015). The uptake of electronic commerce by SMEs: A meta theoretical framework expanding the determining constructs of TAM and TOE frameworks. Journal of Global Business Technology, 6(1), 1-27.

Kongsrisak, C. (2010). Marketing Mix Factors Affecting the Construction Contractor Decisions on the Purchase of Ready Mixed Concrete in muang District, Nan Province. Thesis of the Degree of Master of Business Administration. Chiang Mai: Maejo University. [Online]. Retrieved May, 30, 2020 from: http://webpac.library.mju.ac.th:8080/mm/fulltext/thesis/2553/chalerwatch_ kongsrisak/fulltext.pdf (in Thai)

National Innovation Agency (Public Organization) (NIA). (2005). Journal of Business Administration. Bangkok: Ministry of Science and Technology.

Panyawai, P. (2016). The Technology Acceptance and Country of Origin Affecting the Attitude on Pre-order Cosmetic via Online Business of Customer in Bangkok. M.B.A., March 2016, Graduate School, Bangkok University. [Online]. Retrieved June, 22, 2020 from: http://dspace.bu.ac.th/bitstream/123456789/2318/1/narumon_pany.pdf (in Thai)

Phukphakdee, R. (2015). Satisfaction of Thai Customers on Thai Airways. Thesis of the Degree of Master of Arts in Hospitality and Tourism Industry Management. Bangkok: Bangkok University University. [Online]. Retrieved June, 17, 2020 from: http://dspace.bu.ac.th/bitstream/123456789/1104/1/rattanan.phuk.pdf (in Thai)

Rogers, E. M. (1995). Diffusion of innovations. 3rd ed. New York: Free.

Sincharu, T. (2006). Art, research and statistical data analysis with SPSS. 5th ed. Bangkok: V. Interprint. (in Thai)

Vanichbuncha, K. (2006). Academic Resource and Information Technology Rajamangala University of Technology Phra Nakhon. [Online]. Retrieved May 12, 2020, from: www.e-manage.ac.th (in Thai)

Wannachotipawat, C. (2017). Factors Influencing Ready-Mix Concrete Purchase Satisfaction. Bangkok: Faculty of Commerce and Accountancy, Thammasat University. [Online]. Retrieved June, 20, 2020, from: http://ethesisarchive.library.tu.ac.th/thesis/2017/TU_2017_ 5902031755_7355_6045 (in Thai)

Wongthongchai, J. (2012) Perception factors affecting acceptance of 2-Dimensions barcode of generation Y users. Thesis of the Degree of Master of Management. Nakhon Ratchasima: Suranaree University of Technology. [Online]. Retrieved May, 20, 2020 From: https://so05.tcithaijo.org/index.php/sjss/article/view/19945 (in Thai)

Kanlaya Vanichbuncha. (2006) Academic Resource and Information Technology Rajamangala University of Technology Phra Nakhon; 2549 (Online). Retrieved May 12, 2020, from: www.e-manage.ac.th (In Thai)

Kwankhao Apinun. (2013). Factors influencing the selection of ready-mixed concrete of WanPhatcement in Singburi.M.B. A, April 2015, Graduate School, Bangkok University. (Online).Retrieved June, 2020 from: http://dspace.bu.ac.th/jspui/handle/123456789/1509 (In Thai)

Napatsanan Sritanaviboonchai. (2012). Factors Affecting Over Customers’ Satisfaction on Multifunction Printer in Bangkok Metropolis. Master of Business Administration in Management at Srinakharinwirot University. (Online). Retrieved June, .19, 2020 From: http://thesis.swu.ac.th/swuthesis/Man/Napatsanan_S.pdf (In Thai)

National Innovation Agency (Public Organization) or NIA. (2005). Journal of Business Administration: Bangkok, NIA. Ministry of Science and Technology.

Orathai Luanwan. (2012). Factors Affecting Information Technology Acceptance: A Case Study of Community Development Department, Government Complex Chaeng Watthana.Genneral Management Rajamangala University of Technology Thanyaburi. (Online). Retrieved May, 26, 2020, from: http://www.repository.rmutt.ac.th/bitstream/handle/123456789/933/131875.pdf?sequence=1 (In Thai)

Panyawai, P. (2016). The Technology Acceptance and Country of Origin Affecting the Attitude on Pre-order Cosmetic via Online Business of Customer in Bangkok. M.B.A., March 2016, Graduate School, Bangkok University. (Online) Retrieved June, 22, 2020 from: http://dspace.bu.ac.th/bitstream/123456789/2318/1/narumon_pany.pdf (In Thai)

Pornchanok Palaboon, (2016). Innovation and Technology Acceptance, Technology Usage, and Customer Behavior Affecting People’s Intention to Use Prompt Pay Financial Service of Thai Government (123 pp.) M.B.A., June 2016, Graduate School, Bangkok University. (Online) Retrieved June, 21, 2020 from: file:///C:/Users/USER/Downloads/pornchanok_pala.pdf (In Thai)

Rattanan Phukphakdee. (2015). Satisfaction of Thai Customers on Thai Airways. R. M.A. (Hospitality and Tourism Industry Management), January 2015, Graduate School, Bangkok University University. (Online). Retrieved June, 17, 2020 From: http://dspace.bu.ac.th/bitstream/123456789/1104/1/rattanan.phuk.pdf (In Thai)

Roger, Everett M. (1983). DIFFUSION OF INNOVATIONS Third Edition Diffusion of innovations-Study and teaching-History. The Free Press A Division of Macmillan Publishing Co., Inc. 866 Third Avenue, New York, N. Y. 10022 (Online) from: https://teddykw2.files.wordpress.com/2012/07/everett-m-rogers-diffusion-of-innovations.pdf

Rogers, E. M. (1995). Diffusion of innovations (3 rd ed.). New York: Free.

Sonmnuk Aujirapongpan. (2011). Knowledge Management Capability and Innovativeness of Innovative Entreprenuers in Thailand (Online). Retrieved March, 30, 2020, from: file:///C:/Users/USER/Downloads/2980-Article%20Text-5909-1-10-20121004.pdf (In Thai)

Thanin Sincharu. (2006) .art, research and statistical data analysis. With SPSS to print 5th Bangkok International VJ: phrin. (In Thai)

Downloads

Published

2020-12-24

How to Cite

Kullayapichet, C., & Rakbumrung, W. . (2020). Innovative Prototype development for Concrete Sales Management of Saha Nakhonpathom Concrete Co., Ltd. Journal of Innovation and Management, 5(-), 43–56. Retrieved from https://so03.tci-thaijo.org/index.php/journalcim/article/view/244429